The MMP is produced introducing in the Portland cement-based mortar a styrene-butadiene latex, polypropylene fibers and heat-expanded vermiculite. Instead of the use of these classical materials, this work analyzes the compressive stress transfer in precast concrete connections using an alternative cement-based material, simply called here as a modified mortar pad (MMP). The other alternatives used to transfer the compressive stress in the contact surfaces are the fulfillment of the space between elements with grout or the use of a steel plate in the connection. The most commonly used materials in the pad is the polychloroprene. The use of these pads tend to distribute uniformly the compressive stresses, allowing some relative movement between the precast elements. A possibility to avoid these stress concentrations are the use of a bearing pad between the connected parts. Depending on the existent superficial irregularities in precast elements, a stress concentration with early rupture can occur in the region of connections with direct contact. The connections between precast concrete elements are very important in the design of this type of structural solution. Os principais resultados dos ensaios de ligação foram: a) a presença da almofada aumentou a resistência em 24% para espessuras de saliências de 0,5 mm e cerca de 12% para blocos com faces ligadas lisas b) a efetividade da almofada aumentou à medida que se reduziu a resistência à compressão do concreto c) para carregamento cíclico, a almofada de apoio aumentou em 48% a resistência da ligação.Īlmofada de apoio almofada de argamassa modificada transferência de tensões Os parâmetros variados foram: rugosidade superficial (saliências na face ligada de diferentes espessuras), resistência à compressão do concreto dos blocos e carregamento monotônico e cíclico. As análises de transferência de tensões foram realizadas intercalando uma almofada entre dois blocos de concreto e submetendo o corpo de prova a ensaios de compressão. O objetivo deste trabalho é analisar a transferência de tensões de compressão entre elementos de concreto pré-moldado através de almofadas de argamassa modificadas com fibras de polipropileno, látex estireno-butadieno e vermiculita termo-expandida.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |