![]() ![]() If the body shell of your Team Magic G4 is broken, ripped or damaged in any way, this can be easily repaired with rubber solution glue. If they are scratched, change them as soon as possible. ![]() At the same time, change the O-Ring seals to prevent more leakage. If you feel a jolt as you change direction, this means the oil has leaked out and must be topped up. The damper shafts should push in and pull out with a smooth action. Next, for those Team Magic models with oil filled shock absorbers, remove them from the chassis and dismantle the coil springs. Then, take a screwdriver and box spanner and check each self tapping screw and nut for security, taking care not to over tighten. When you receive your used Team Magic Touring Car, make a general visual inspection of the chassis, front and rear wishbones, suspension shock towers etc, for any broken parts that may need to be replaced. With an instruction manual, any problems with your model Touring Car you may discover, can easily be fixed. ![]() If not supplied with your purchase, they can often be downloaded from the Team Magic website, or purchased separately on eBay. The one thing you will always need is an instruction manual. However, depending on the age of your purchase, it may need a little tender loving care before you can take it out on the road. Cheap, pre-loved bargains are always becoming available. It is generally cheaper than new, ready built and may come with a variety of expensive hop-ups already installed. Please allow some extra time for delivery, however at this point we post your items within 24 hours.Buying a Used Team Magic G4 Touring Car (and What to look for)īuying a used Team Magic G4 Nitro Touring Car, or any used RC Model, has a number of advantages. ON-LINE SHOPPING:Īll products are DISINFECTED before postage. Hand Sanitiser is provided for your safety and the eftpos/door handles are disinfected several times a day. We process payments contactless and EFTPOS / Credit Card is proffered. ![]() We are requesting that there is maximum of one customer on the premises at all times. However please be aware that there are restrictions for your safety. Our shops are OPEN (Rockingham and Canning Vale only). Pre-Appointments over the phone may be required, especially for the Canning Vale office. Kirby machines are picked up from the customers front door and delivered to the front door.Īlternatively Kirby machines can be dropped in our Kirby Service offices in 3/67 Dixon Road for Rockingham, Mandurah and surroundings AND 8/8 Production Road Canning Vale for PERTH and surroundings. We have made some important updates in regards to COVID-19 SERVICING:Īll service is done CONTACTLESS. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |